NUCLEONIX offers a standard High Voltage Unit Type HV501 which is a compact STANDARD/NIM Module (2 bit). This is designed to meet the full HV bias requirement for a broad range of Nuclear radiation detectors like G.M.detectors, ionization chambers, scintillation detectors, photo multiplier tubes, etc,. Apart from this range of applications it also can be used as a high voltage source in areas where high degree of regulation, stability and accuracy are required. Output can be varied by a precision ten turn helipot and output indication is provided on a DPM.
|
Features
- (0-1500V) @ 1mA, continuously adjustable High Voltage output
- Indication on 3 1/2 LED DPM
- Ripple & noise less than 20mV.
- Regulation better than 0.05% of full scale
- Two bit module
|
 |
| Specifications |
|
OUTPUT VOLTAGE |
0V to 1500V continuously variable by a ten turn helipot provided on front panel. (All specifications are valid from 10V to 1500V). |
|
OUTPUT INDICATION |
Provided on a 3 1/2 digit LED, DPM. |
|
OUTPUT CONNECTOR |
MHV Socket (by default)
UHF Socket (if specified) |
|
OUTPUT CURRENT |
It can deliver upto a maximum of 1mA. |
|
OUTPUT POLARITY |
The unit is offered with a choice of both POSITIVE or NEGATIVE POLARITY selectable by reversing a polarity connector. (Provided inside). |
|
LINE & LOAD REGULATION |
Better than 0.05% of full scale. |
|
RIPPLE |
Less than 20 mV peak to peak. |
|
PROTECTIONS |
Indefinite protection against overload and short circuit . Under overload the unit doesn't meet the specifications whereas on removal of short circuit it will recover by itself. |
|
POWER REQUIREMENT |
Draws power from a standard BIN / NIM Power Supply or MINIBIN power supply.
+24V at 250mA
+12V at 50mA
-12V at 50mA |
|
LINEARITY |
Better than +/- 0.2% |
|
TEMPERATURE STABILITY |
Better than 100 PPM. |
|
MECHANICAL DIMENSIONS |
Standard 2 bit. |
|
REAR MODULE CONNECTOR |
Amphenol connector Type:26-159-24P-H (24 pin type) or NIM standard connector as per AEC specifications TID 20893 (Rev) Type : AMP 2041865 optional. |
