Radioactive contamination (RaC) in steel industries has become a serious issue these days. Many of the steel industries have approached us for sample analysis, to obtain report in Bq /gm. In view of this Nucleonix System, has decided to offer Radioactive Contamination analysis services from its Radio-analytical lab with immediate effect. Details of the sample requirement by weight, by dimensions and terms and conditions are given in the following paragraphs / points. A Quotation towards the sample analysis is attached

• Samples sent for analysis, net weight should not be less than 1.5Kg and not more than 2 Kg.
• The entire mass sent for analysis shall be of the same heat. Heat number is to be specified. Mixed heat samples can not be analysed as this will give rise to wrong results.
• If your components are very small in size then you can send multiple components with total weight being within the range as specified above.
• Largest dimension of the sample in any direction should be not more than 3”
•   Analysis will be done using NaI scintillation detector based multichannel analyzer system with Detector being covered with adequate lead shielding. Report will be issued by our Radio analytical lab
•   Scanned copy of the report will be emailed within two days on receipt of the sample. Additionally on our letter head signed copy will be couriered. All the reports will be signed by the Radiation Safety Officer (RSO) of our company Shri J.DHEERAJ REDDY.
• Rs. 3000 (all inclusive) Charges are per each sample analysis (of same heat).
• Along with the sample you can send a DD of Rs. 3000.00 Inclusive of All Taxes.
• Sample sent for analysis can not be retuned back.

  Should you have any requirement of this service you are welcome to revert back to us.