Power Supply Unit *

Power Supply Unit * [ TYPE : PS 402H ]

Technical Data
manual
Features
Specifications
Input Voltage 110V / 230V ac, single phase 50Hz with 10% variation in input voltage range.
Frequency 50Hz or – 3Hz
Current 1.5A (max.) at 160W output, excluding 0.5 Amp for 115V AC output.
DC output +/-6V DC @ 7.5A / +/-12V DC @ 3A / +/-24V DC @ 1.5A Total combined load not to exceed 160W
Regulation For +/-12V and 24V +/-0.05% (total band 0.1%), for +/-6V +/-0.1% (total band 0.2%), Over the combined range of zero to full load and specified mains variation, for measurements made within 1 min. period
Stability For +/-12V and +/-24V is +/-0.3%, for +/-6V is +/-0.6% over any 24 hrs period at constant ambient temperature. Over the combined range of no load to full load and specified mains variation after 60 min. warmup.
Temperature Range 0 to 500C ambient.
Temperature Coefficient 0.02% per 0C over 0 to 50 0C ambient.
Noise & Ripple (rms) For +/-12V, +/-24V & +/-6V 10mV rms, after subtraction of GND noise.
Recovery Time +/-12V and +/-24V outputs will recover within +/-0.1% and +/-6V outputs will recover within +/-1% of steady state value within 1000 micro seconds following any change in specified line voltage or between 10 to 100% full load.