Power Supply Unit

Power Supply Unit [ TYPE : PS 402 ]

Technical Data
Input 117V / 230V AC, single phase 50Hz with 10% variation in input voltage range. 3 Pin MS series connector is provided through 3-core cable.
DC output +12V DC at 3A; -12V DC at 3A +24V DC at 1.5A; -24V DC at 1.5A total output load not to exceed 96W at 30o centigrade
AC output 115V AC @0.5A has been wiredup and provided at each of the module connectors.
Regulation Better than +/-0.05% over combined range of zero to full load and input voltage of 88% to 110% of rated input at constant ambient temperature after a 60 min warmup.
Stability After warmup the voltage shall not vary by more than +/-0.2% of the nominal values at any time during any 24 hours period at constant ambient temperature over the combined range of no load to full load and input voltage +10% to -12% of nominal
Temperature Range 0 oc to +50oc without derating. Operation upto +60 oc is possible with a derating of 3% per oc for temeratures above +50oc.
Temperature Coefficient Less than 0.02% per oc upto +50oc.
Noise & Ripple (rms) The combined output voltage noise and ripple shall not exceed 5mV
Voltage Adjustment Output is adjustable over a nominal range of atleast +/-0.5% by means of a screw driver adjustment. Adjustment potentiometers are provided on the PCBs and are easily accessible when top cover is removed.
Circuit Protection a. Input of the mains supply is protected by two fuses.
b. Overload and short circuit protection is achieved by electronic circuitry. The output shall recover automatically when the overload / short circuit is removed. Continuous short circuit will not damage the power supply
Dimensions 430W x 168D x 153H approx. (in mm)